Put the Can in
Bombshell Soft wax comes in plastic cans. Feel free to place the cans directly into a wax warmer to use.
Melt the Wax:
Turn on your wax warmer.
Turn temperature past half-way until wax is melted, to check, lift the wax with a spatula;
if it drips instantly, it’s too hot. If it clings to the applicator without dripping for about 3 seconds, it’s ready.
Then either;
lower temp to before half-way and keep in warmer to use.
pour the wax from the plastic can into a metal insert to use.
Test the Temperature:
Apply a small test strip of wax on your wrist. This ensures the wax is at a safe temperature to avoid skin burns. Adjust temperature to the fluctuating wax & room temperatures.
Apply the wax:
Using a wooden spatula,
stir the wax in a figure-eight motion three times, then scoop. Hold the applicator perpendicular to the skin
and apply wax evenly in the direction of hair growth with gentle pressure.
Apply the strip:
After applying the wax, grab your wax strips
and lay the strip over the applied wax, pressing firmly and smoothing it down in the direction of hair growth.
Leave a small section of the strip wax free to grip when removing.
Remove the Strip:
Hold the skin taut with one hand, grab the edge of the strip with the other, and peel it off briskly in the opposite direction of hair growth.
Immediately apply pressure to the waxed area to soothe the skin & the customer.
